in situ interlaboratory comparisons for dissolved oxygen concentration and pH

Organization, benefits, and possible drawbacks of in situ interlaboratory comparison are discussed using the example of dissolved oxygen concentration and pH measurements organized at the University of Tartu. In situ interlaboratory comparisons are intercomparison measurements, where all the participants (with their technical equipment and using their own competence) are measuring the same sample continuously at the same time, at the same site. In the field of proficiency testing–especially in chemical measurements–the in situ schemes are not yet widespread. Their main advantage emerges in the fields where, due to non-stability of samples, traditional comparison schemes can fail. Direct exchange of experience between the participants and presentations during measurements may add the value to in situ interlaboratory comparison. Dissolved oxygen concentration and pH measurements are among the most widespread chemical measurements. Both measurements are complex and less robust than often considered. In this paper, we describe in situ interlaboratory comparisons of dissolved oxygen concentration and pH organized at University of Tartu Testing Centre. Electronic Supplementary Material  Supplementary material is available for this article if you access the article at . The Final Report of the DO Concentration and pH Intercomparison is available in the electronic supplementary material.

In situ quadrupole mass spectrometry study of atomic-layer deposition of ZrO2 using Cp2Zr(CH3)2 and water

Reactions during the atomic layer deposition (ALD) process of ZrO(2) from Cp(2)Zr(CH(3))(2) and deuterated water as precursors were studied with a quadrupole mass spectrometer (QMS) at 210-440 degrees C. The detected reaction byproducts were CpD (m/z = 67) and CH(3)D (m/z = 17). Almost all (90%) of the CH(3) ligands were released during the Cp(2)Zr(CH(3))(2) precursor pulse because of exchange reactions with the OD-terminated surface, and the rest, during the D(2)O pulse. About 40% of the CpD was released during the metal precursor pulse, and 60%, during the D(2)O pulse. ALD-type self-limiting growth was confirmed from 210 to 400 degrees C. However, below 300 degrees C the growth rate was low. Precursor decomposition affected the film growth mechanism at temperatures exceeding 400 degrees C.     

Atomic layer deposition of tungsten(III) oxide thin films from W2(NMe2)6 and water: precursor-based control of oxidation state in the thin film material

The atomic layer deposition of W2O3 films was demonstrated employing W2(NMe2)6 and water as precursors with substrate temperatures between 140 and 240 degrees C. At 180 degrees C, surface saturative growth was achieved with W2(NMe2)6 vapor pulse lengths of >/=2 s. The growth rate was about 1.4 A/cycle at substrate temperatures between 140 and 200 degrees C. Growth rates of 1.60 and 2.10 A/cycle were observed at 220 and 240 degrees C, respectively. In a series of films deposited at 180 degrees C, the film thicknesses varied linearly with the number of deposition cycles. Time-of-flight elastic recoil analyses demonstrated stoichiometric W2O3 films, with carbon, hydrogen, and nitrogen levels between 6.3 and 8.6, 11.9 and 14.2, and 4.6 and 5.0 at. %, respectively, at substrate temperatures of 160, 180, and 200 degrees C. The as-deposited films were amorphous. Atomic force microscopy showed root-mean-square surface roughnesses of 0.7 and 0.9 nm for films deposited at 180 and 200 degrees C, respectively. The resistivity of a film grown at 180 degrees C was 8500 microhm cm.     

Kinetics of the reactions of chlorinated methyl radicals (CH2Cl, CHCl2, and CCl3) with NO2 in the temperature range 220-360 K

The kinetics of the reactions of chlorinated methyl radicals (CH2Cl, CHCl2, and CCl3) with NO2 have been studied in direct measurements at temperatures between 220 and 360 K using a tubular flow reactor coupled to a photoionization mass spectrometer. The radicals have been homogeneously generated at 193 or 248 nm by pulsed laser photolysis of appropriate precursors. Decays of radical concentrations have been monitored in time-resolved measurements to obtain the reaction rate coefficients under pseudo-first-order conditions with the amount of NO2 being in large excess over radical concentrations. The bimolecular rate coefficients of all three reactions are independent of the bath gas (He or N2) and pressure within the experimental range (1-6 Torr) and are found to depend on temperature as follows: k(CH2Cl + NO2) = (2.16 +/- 0.08) x 10(-11) (T/300 K)(-1.12+/-0.24) cm3 molecule(-1) s(-1) (220-363 K), k(CHCl2 + NO2) = (8.90 +/- 0.16) x 10(-12) (T/300 K)(-1.48+/-0.13) cm3 molecule(-1) s(-1) (220-363 K), and k(CCl3 + NO2) = (3.35 +/- 0.10) x 10(-12) (T/300 K)(-2.2+/-0.4) cm3 molecule(-1) s(-1) (298-363 K), with the uncertainties given as one-standard deviations. Estimated overall uncertainties in the measured bimolecular reaction rate coefficients are about +/-25%. In the reactions CH2Cl + NO2, CHCl2 + NO2, and CCl3 + NO2, the products observed are formaldehyde, CHClO, and phosgene (CCl2O), respectively. In addition, a weak signal for the HCl formation has been detected for the CHCl2 + NO2 reaction.     

Estimation of uncertainty in electrochemical amperometric measurement of dissolved oxygen concentration

A procedure for the estimation of measurement uncertainty of dissolved oxygen (DO) concentration measurement based on the ISO approach is presented. It is based on a mathematical model that involves 14 input parameters. The uncertainty of DO concentration strongly depends on changes in experimental details (temperature difference between calibration and measurement, the time interval between calibration and measurement, etc.). The relative measurement uncertainty is, however, practically independent of the DO concentration itself. The uncertainty is the lowest if the calibration and the measurement are done at the same temperature and on the same day. A calculation tool is provided (in the form of a GUM Workbench file) for practitioners that can be used for uncertainty calculation of DO concentrations at very different experimental conditions.Electronic Supplementary Material The uncertainty calculation example is available as a GUM Workbench calculation file C_O2_meas.smu (GUM Workbench ver. 1.3.3, Metrodata GmbH) together with its data file Input_values.xls (MS Excel 97). For those users who do not have GUM Workbench, the full report of the GUM Workbench calculation is available as a PDF file C_O2_meas.pdf. This material is available via the Internet at .     

A computational study of the adsorption of small Ag and Au nanoclusters on graphite

The adsorption of silver and gold atoms, and M2, M6, and M13 (M=Ag or Au) clusters on the (0001) graphite surface has been investigated computationally using the density functional theory (DFT) with periodic boundary conditions and plane wave basis functions. The surface has been modeled as a single carbon sheet. The role of dispersion forces has been studied with an empirical classical model. The results show that the clusters avoid hollow sites on the graphite surface, and that the metal atoms favor atop and bond sites. Large structural changes are observed in octahedral M6 and icosahedral M13 clusters on the graphite surface when compared with gas-phase geometries. The results also indicate that if accurate results are required, the dispersion forces between metal and carbon atoms should be included in the studied systems.     

Calculated band profiles of the OH-stretching transitions in water dimer

We have calculated the band profiles of the OH-stretching fundamental and overtone transitions in the proton donor unit of the water dimer complex. We have used a local mode Hamiltonian that includes both OH-stretching and OO-stretching motion but separates these adiabatically. The variation of OH-stretching frequency and anharmonicity with OO displacement from equilibrium contributes to the effective OO-stretching potentials for each OH-stretching state. The resulting OO-stretching energy levels and wave functions are used to simulate the vibrational profile of each OH-stretching transition. The coupled cluster with singles, doubles, and perturbative triples ab initio method with an augmented triple-zeta correlation consistent basis set has been used to obtain the necessary parameters, potentials, and dipole moment functions. We find that the OO-stretching transitions associated with a given hydrogen bonded OH-stretching transition are spread significantly and this spread increases with overtone. The spread is minor for the free OH-stretching transition. The inclusion of the OO-stretching mode has a limited effect on the overall OH-stretching band intensity.     

Heterogeneous multicomponent nucleation theorems for the analysis of nanoclusters

In this paper we present a new form of the nucleation theorems applicable to heterogeneous nucleation. These heterogeneous nucleation theorems allow, for the first time, direct determination of properties of nanoclusters formed on pre-existing particles from measured heterogeneous nucleation probabilities. The theorems can be used to analyze the size (first theorem) and the energetics (second theorem) of heterogeneous clusters independent of any specific nucleation model. We apply the first theorem to the study of small water and n-propanol clusters formed at the surface of 8 nm silver particles. According to the experiments the size of the two-component critical clusters is found to be below 90 molecules, and only less than 20 molecules for pure water, less than 300 molecules for pure n-propanol. These values are drastically smaller than the ones predicted by the classical nucleation theory, which clearly indicates that the nucleating clusters are too small to be quantitatively described using a macroscopic theory.     

2,5‐Dihydroxybenzoic acid solution in MALDI‐MS: ageing and use for mass calibration

2,5‐Dihydroxybenzoic acid (DHB) is one of the most widely used and studied matrix compounds in matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry. However, the influence of ageing of the DHB solution on the MALDI mass spectra has not been yet systematically studied. In this work, the possible changes occurring in the acidified acetonitrile/water solution of the MALDI matrix compound DHB during 1‐year usage period have been monitored with MALDI‐Fourier transform ion cyclotron resonance mass spectrometer (MALDI‐FT‐ICR‐MS) and attenuated total reflectance Fourier transform infrared (ATR‐FT‐IR) spectroscopy. No significant ageing products have been detected. The ability of the aged DHB solution to act as a MALDI matrix was tested with two materials widely used in art and conservation – bone glue (a proteinaceous material) and shellac resin (a resinous material) – and good results were obtained. A number of peaks in the mass spectra measured from the DHB solution were identified, which can be used for internal calibration of the mass axis. Copyright © 2014 John Wiley & Sons, Ltd.     

Accessibility of hydroxyl groups in birch kraft pulps quantified by deuterium exchange in D2O vapor

Deuterium exchange in a deuterium oxide (D₂O) atmosphere (95 % relative humidity), quantified by a dynamic vapor sorption (DVS) apparatus, was applied for assessing the accessibility of hydroxyl groups in birch kraft pulps. Achieving the maximum deuteration level exhibited slower kinetics than was earlier reported for experiments with ground wood and bacterial cellulose. The deuterium exchange process followed two parallel phenomena. Applying multiple drying and rewetting cycles gave kinetic information also on the hornification phenomenon occurring during these cycles. Dry birch pulps treated with sodium hydroxide solution of varying alkalinities at elevated temperatures were assessed for their accessible hydroxyl groups by DVS with deuterium exchange. This method was evaluated against deuteration combined with Fourier transform infra-red spectroscopy and water retention value (WRV). DVS measurements were in correlation with WRV and both the methods indicated that an alkaline treatment of dry birch pulp improves cellulose accessibility. The level of irreversible deuteration also decreased as the alkalinity was increased. DVS was shown to provide quantitative information on the accessibility but to be a time-consuming method for the pulp samples. A potential means to decrease the duration of the measurement is increased D₂O exposure by excluding the drying phases.